When you consider all the things that affect the air quality inside your home while you’re cooking, having a quality range hood makes perfect sense. All the gunk – steam, smoke, food particles, grease –  that splatters on your stove can wind up in your air. A good range hood sucks all of it up and filters it out, preventing it from settling into the fabrics in your house and lingering…forever. 

That’s where CFM comes in. 

What is CFM for Range Hoods?

CFM means cubic feet of air moved per minute. Simply put, it’s the amount of air a ventilation hood fan is capable of removing through its filter every minute. The fan has to be powerful enough to cover the cooking area and suck up all that potential pollution, but not so loud you feel like you’re cooking next to a jet engine. 

How to Calculate the Right CFM for Your Home

You can figure your CFM in several different ways, considering the size of your range, the size of the room, the layout of your kitchen, and the different types of range hoods you’re considering. 

Here’s what you need to consider:

• Type of range hood – ducted or non-ducted?
• Type of stove – electric or gas?
• Room size
• Ductwork

Ducted Range Hoods for Electric Cooktops:

• Wall-mounted & Under-cabinet range hoods- 100 CFM for every linear foot of cooktop. Most common types of cooktops measure 30 inches wide, or 2.5’. To meet the recommended CFM requirements, you’ll need a range hood with 250 CFM. 

2.5’ wide cooktop x 100 CFM = 250 CFM

• Island hoods – 150 CFM for every linear foot of cooktop. Due to the open nature of a kitchen island stove, you need extra power. As a general rule of thumb, for the same 30” cooktop, you’ll need a range hood with 375 CFM.

2.5’ wide cooktop x 150 CFM = 375 CFM

While we’ve modeled on an average sized cooktop, your stove may be as narrow as 20 inches or as wide as a 60-inch commercial model. Measure or check the specs in your user manual to be sure.

Ducted Range Hoods for Gas Cooktops

Gas stovetops can heat up the room more than an electric cooktop. It’s wise to choose a range hood fan with higher CFM if you have a gas stove. 

Heat output is measured in BTU, which stands for British Thermal Units. One BTU is the amount of energy needed to heat or cool 1 lb of water by 1°F at sea level. Each burner on your cooktop has a BTU rating (check your user manual). 

To calculate the CFM for a gas stove, add the BTU ratings for all burners. Typically, 5,000 to 15,000 per burner is common, and a standard size four-burner stove will be about 40,000 BTU total. Divide your total by 100 to figure the CFM you need.

40,000 BTU  ÷ 100 = 400 CFM range hood fan or higher

Room Size for Range Hoods

Next, consider the size of the room. The trend toward open kitchen layouts and higher ceilings influences the extent to which uncaptured particulates can travel. An effective range hood should be capable of exchanging the air in the kitchen every 4 minutes (15 times per hour) by volume to keep your indoor air clean. 

For example, if you have an open concept home, your kitchen may be located in a 20’ x 20’ room with 10’ ceilings. 

20’ x 20’ x 10’ = 4,000 cubic feet

To figure the CFM needed for your size kitchen, divide the cubic feet by 4 (minutes)

4,000  ÷ 4 = 1,000 CFM range hood (or higher)

Ductwork

Finally, you need to consider your ducts. Since your fan must pull the air through the filter and out through the duct to the vent, the length of the ductwork is an additional consideration. Common ducts are round and about 6 inches in diameter. For each foot of pipe, add one additional CFM. If the pipe has elbow bends, add 25 CFM for each, plus 40 CFM for the cap.

How to Decide On A CFM Number

With all the different factors to consider, which calculation is the right one? Simple. Pick the biggest CFM number. When it comes to CFM, the more, the better. Look for a range hood that offers all the power you need, with the quiet operation you’ll want to save your sanity. Other features to look for include variable fan speeds, dish-washer safe baffle filter, touch panel operation, energy-saving LED light, and of course, a hood style that fits your aesthetic.

ROBAM range hoods offer award-winning performance, with high CFM, quiet operation, cutting-edge technology, and superior filtering. Our stylish, high-performance range hoods pair perfectly with our cooktops to make your space the kitchen of your dreams.

How Range Hoods Cleans the Air

Ideally, your range hood is the same size as your cooking surface, has a powerful, quiet fan, a good filter, and a vent to the outside. Unfortunately, that is not always the case. Common range hood issues include:

• No outside ventilation – in some cases, such as stoves located on the interior wall of an apartment building, exterior ducting is not possible. In that case, you’re likely to have a ductless range hood, which is essentially a fan that pulls cooking air through a filter and expels it back into the room. These are not all created equal. 
• Your range hood needs to be cleaned – Range hoods need regular cleaning to be effective, and filters need to be replaced or cleaned now and then. 
• All noise, no pull – Some kitchen ventilation fans are ineffective. They may be loud, but they don’t really accomplish anything. They simply don’t have the CFM to do the job.
• You forget to turn it on. The number one reason cited? It’s too loud.

The Dangers of Not Using Your Kitchen Exhaust Fan

Indoor air pollution is a health risk. In the short term, pollutants can trigger asthma attacks, irritate the eyes, nose, and throat, and cause headaches, dizziness, and fatigue. Temporary effects usually go away on their own with limited exposure, but over the long term, living in a home with a poor ventilation system can result in chronic respiratory diseases, heart disease, cancer, and even death.